The reason for the poor condition of titanium alloy screws in car modification!

Release time：2023-04-23 19:06:51 丨 Number of visits：

If there are any defects in the titanium alloy screws used for car modification, it will affect the effectiveness of use. Once discovered, it is necessary to promptly handle them. What specific reasons can cause various defects in titanium alloy screws? Now let the editor analyze and introduce it for everyone.

1、 The head of titanium alloy screws is not round, which is usually caused by insufficient or improper selection of the screw mold during the stamping process.

2、 There are three possible reasons for the presence of burrs or burrs on the surface of screws. One is due to excessive porosity during the stamping process, the second is due to the short stamping rod, which can also cause burrs on the screw surface, and the third is due to poor stamping.

3、 The head of titanium alloy screws is twisted, which is mainly caused by improper machine adjustment. Of course, it may also be caused by poor installation of screw molds.

4、 The head of the screw has cracks and cracks. If such a situation occurs, it is usually due to quality issues with the material itself. Therefore, before starting the screw wire, it must be inspected by the quality department.